TIMKEN HH224340-HH224310-B Bearing

TIMKEN HH224340-HH224310-B tapered bearings with Flange

Also known as : HH224340-HH224310-B

  • Inside Diameter: 107.95 mm
  • Outside Diameter: 212.725 mm
  • Width: 23.813 mm
  • Basic dynamic load rating: 680 kN
  • Basic static load rating: 906 kN

Inquire Now


TIMKEN HH224340-HH224310-B Bearing

TIMKEN HH224340-HH224310-B Bearing details

Series HH224300
model HH224340-HH224310-B
Cone Part Number HH224340
Cup Part Number HH224310-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 11.60 Kg
25.500 lb
Dimensions
d - Bore 107.95 mm
4.25 in
D - Cup Outer Diameter 212.725 mm
8.3750 in
D1 - Flange Outer Diameter 223.733 mm
8.8084 in
B - Cone Width 66.675 mm
2.6250 in
C - Cup Width 53.975 mm
2.1250 in
C1 - Cup Flange Width 11.113 mm
0.4375 in
T - Bearing Width to Flange 23.813 mm
0.9375 in
T1 - Bearing Width 66.675 mm
2.6250 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 7.900 mm
0.310 in
r - Cup Backface "To Clear" Radius 3.30 mm
0.130 in
da - Cone Frontface Backing Diameter 126 mm
4.96 in
db - Cone Backface Backing Diameter 138.90 mm
5.47 in
Da - Cup Frontface Backing Diameter 204.47 mm
8.05 in
Ab - Cage-Cone Frontface Clearance 3.8 mm
0.15 in
Aa - Cage-Cone Backface Clearance 4.1 mm
0.16 in
a - Effective Center Location -18.8 mm
-0.74 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 176000 N
39600 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 680000 N
153000 lbf
C0 - Static Radial Rating 906000 N
204000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 98300 N
22100 lbf
Factors
K - Factor 1.79
e - ISO Factor 0.33
Y - ISO Factor 1.84
G1 - Heat Generation Factor (Roller-Raceway) 367
G2 - Heat Generation Factor (Rib-Roller End) 47.8
Cg - Geometry Factor 0.118

As TIMKEN bearing distributor, Nodes bearings have TIMKEN HH224340-HH224310-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.