TIMKEN LM567949-LM567910-B tapered bearings with Flange
Also known as : LM567949-LM567910-B
- Inside Diameter: 406.4 mm
- Outside Diameter: 549.275 mm
- Width: 38.1 mm
- Basic dynamic load rating: 1430 kN
- Basic static load rating: 3130 kN
TIMKEN LM567949-LM567910-B Bearing
TIMKEN LM567949-LM567910-B Bearing details
| Series | LM567900 |
|---|---|
| model | LM567949-LM567910-B |
| Cone Part Number | LM567949 |
| Cup Part Number | LM567910-B |
| Design Units | Imperial |
| Cage Type | Stamped Steel |
| Bearing Weight |
54.20 Kg 119.40 lb |
| Dimensions | |
| d - Bore |
406.400 mm 16.0000 in |
| D - Cup Outer Diameter |
549.275 mm 21.6250 in |
| D1 - Flange Outer Diameter |
563.463 mm 22.1836 in |
| B - Cone Width |
84.138 mm 3.3125 in |
| C - Cup Width |
61.913 mm 2.4375 in |
| C1 - Cup Flange Width |
14.288 mm 0.5625 in |
| T - Bearing Width to Flange |
38.100 mm 1.5000 in |
| T1 - Bearing Width |
85.725 mm 3.3750 in |
| Abutment and Fillet Dimensions | |
| R - Cone Backface "To Clear" Radius |
6.400 mm 0.25 in |
| r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
| da - Cone Frontface Backing Diameter |
427 mm 16.81 in |
| db - Cone Backface Backing Diameter |
436.90 mm 17.2 in |
| Da - Cup Frontface Backing Diameter |
531.11 mm 21.02 in |
| Ab - Cage-Cone Frontface Clearance |
4.8 mm 0.19 in |
| Aa - Cage-Cone Backface Clearance |
11.4 mm 0.45 in |
| a - Effective Center Location |
15.5 mm 0.61 in |
| Basic Load Ratings | |
| C90 - Dynamic Radial Rating (90 million revolutions) |
371000 N 83500 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions) |
1430000 N 322000 lbf |
| C0 - Static Radial Rating |
3130000 N 704000 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) |
259000 N 58200 lbf |
| Factors | |
| K - Factor | 1.43 |
| e - ISO Factor | 0.41 |
| Y - ISO Factor | 1.47 |
| G1 - Heat Generation Factor (Roller-Raceway) | 3800 |
| G2 - Heat Generation Factor (Rib-Roller End) | 427 |
| Cg - Geometry Factor | 0.214 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN LM567949-LM567910-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.
