FAG B7000-C-2RSD-T-P4S Bearing

FAG B7000-C-2RSD-T-P4S spindle bearings | 10x26x8mm

Also known as : B7000-C-2RSD-T-P4S

  • Inside Diameter: 10 mm
  • Outside Diameter: 26 mm
  • Width: 8 mm
  • Basic dynamic load rating: 4.1 kN
  • Basic static load rating: 1.47 kN

Inquire Now

FAG B7000-C-2RSD-T-P4S Bearing

FAG B7000-C-2RSD-T-P4S Bearing details

Number B7000-C-2RSD-T-P4S  
Type FAG spindle bearings, adjusted, in pairs or sets  
d 10 mm   
D 26 mm   
B 8 mm   
a 6,4 mm   
Da 22 mm  Tolerance: H12
da 14 mm  Tolerance: h12
r1 min 0,3 mm   
ra max 0,3 mm   
ra1 max 0,1 mm   
rmin 0,3 mm   
α 15 °  Contact angle
m 0,021 kg  ≈ Mass
Cr 4100 N  Basic dynamic load rating, radial
C0r 1470 N  Basic static load rating, radial
Cur 151 N  Fatigue limit load, radial
nG Fett 67000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 18 N  Preload force
FV M 65 N  Preload force
FV H 136 N  Preload force
KaE L 54 N  Lift-off force
KaE M 220 N  Lift-off force
KaE H 490 N  Lift-off force
ca L 12,7 N/µm  Axial rigidity
ca M 23 N/µm  Axial rigidity
ca H 33,5 N/µm  Axial rigidity

Nodes bearings have FAG B7000-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.

FAG B7000-C-2RSD-T-P4S bearing cross reference

FAG spindle bearings

Related Information

Product search