FAG B7000-C-T-P4S Bearing

FAG B7000-C-T-P4S spindle bearings | 10x26x8mm

Also known as : B7000-C-T-P4S

• Inside Diameter: 10 mm
• Outside Diameter: 26 mm
• Width: 8 mm
• Basic dynamic load rating: 4.1 kN
• Basic static load rating: 1.47 kN

Inquire Now

FAG B7000-C-T-P4S Bearing

Number	B7000-C-T-P4S
Type	FAG spindle bearings, adjusted, in pairs or sets
d	10 mm
D	26 mm
B	8 mm
a	6,4 mm
Da	22 mm	Tolerance: H12
da	14 mm	Tolerance: h12
Etk max	16,8 mm
Etk min	15,7 mm
Etk1 max	16,8 mm
Etk1 min	15,7 mm
r1 min	0,3 mm
ra max	0,3 mm
ra1 max	0,1 mm
rmin	0,3 mm
α	15 °	Contact angle
m	0,02 kg	≈ Mass
Cr	4100 N	Basic dynamic load rating, radial
C0r	1470 N	Basic static load rating, radial
Cur	151 N	Fatigue limit load, radial
nG Fett	67000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	100000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	18 N	Preload force
FV M	65 N	Preload force
FV H	136 N	Preload force
KaE L	54 N	Lift-off force
KaE M	220 N	Lift-off force
KaE H	490 N	Lift-off force
ca L	12,7 N/µm	Axial rigidity
ca M	23 N/µm	Axial rigidity
ca H	33,5 N/µm	Axial rigidity

Nodes bearings have FAG B7000-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.