FAG B7200-C-T-P4S Bearing

FAG B7200-C-T-P4S spindle bearings | 10x30x9mm

Also known as : B7200-C-T-P4S

  • Inside Diameter: 10 mm
  • Outside Diameter: 30 mm
  • Width: 9 mm
  • Basic dynamic load rating: 6.9 kN
  • Basic static load rating: 2.95 kN

Inquire Now

FAG B7200-C-T-P4S Bearing

FAG B7200-C-T-P4S Bearing details

Number B7200-C-T-P4S  
Type FAG spindle bearings, adjusted, in pairs or sets  
d 10 mm   
D 30 mm   
B 9 mm   
a 7,2 mm   
Da 25,5 mm  Tolerance: H12
da 14,5 mm  Tolerance: h12
Etk max 19,2 mm   
Etk min 18 mm   
Etk1 max 19,2 mm   
Etk1 min 18 mm   
r1 min 0,6 mm   
ra max 0,6 mm   
ra1 max 0,3 mm   
rmin 0,6 mm   
α 15 °  Contact angle
m 0,032 kg  ≈ Mass
Cr 6900 N  Basic dynamic load rating, radial
C0r 2950 N  Basic static load rating, radial
Cur 305 N  Fatigue limit load, radial
nG Fett 56000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
nG Öl 85000 1/min  Limiting speed for minimal quantity oil lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 25 N  Preload force
FV M 91 N  Preload force
FV H 185 N  Preload force
KaE L 79 N  Lift-off force
KaE M 311 N  Lift-off force
KaE H 684 N  Lift-off force
ca L 16,4 N/µm  Axial rigidity
ca M 29,8 N/µm  Axial rigidity
ca H 43,5 N/µm  Axial rigidity

Nodes bearings have FAG B7200-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.

FAG B7200-C-T-P4S bearing cross reference

FAG spindle bearings

Related Information

Product search