FAG B7013-C-T-P4S Bearing

FAG B7013-C-T-P4S spindle bearings | 65x100x18mm

Also known as : B7013-C-T-P4S

  • Inside Diameter: 65 mm
  • Outside Diameter: 100 mm
  • Width: 18 mm
  • Basic dynamic load rating: 41.5 kN
  • Basic static load rating: 25.5 kN

Inquire Now


FAG B7013-C-T-P4S Bearing

FAG B7013-C-T-P4S Bearing details

Number B7013-C-T-P4S  
Type FAG spindle bearings, adjusted, in pairs or sets  
d 65 mm   
D 100 mm   
B 18 mm   
a 20,1 mm   
Da 93 mm  Tolerance: H12
da 72 mm  Tolerance: h12
Etk max 79,5 mm   
Etk min 75,9 mm   
Etk1 max 79,5 mm   
Etk1 min 75,9 mm   
r1 min 1,1 mm   
ra max 1 mm   
ra1 max 0,6 mm   
rmin 1,1 mm   
α 15 °  Contact angle
m 0,42 kg  ≈ Mass
Cr 41500 N  Basic dynamic load rating, radial
C0r 25500 N  Basic static load rating, radial
Cur 2600 N  Fatigue limit load, radial
nG Fett 14000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
nG Öl 22000 1/min  Limiting speed for minimal quantity oil lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 214 N  Preload force
FV M 704 N  Preload force
FV H 1417 N  Preload force
KaE L 660 N  Lift-off force
KaE M 2354 N  Lift-off force
KaE H 5068 N  Lift-off force
ca L 66,7 N/µm  Axial rigidity
ca M 114 N/µm  Axial rigidity
ca H 164 N/µm  Axial rigidity

Nodes bearings have FAG B7013-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.

FAG B7013-C-T-P4S bearing cross reference

FAG B71913-C-T-P4S bearing
65mm x 90mm x 13mm
FAG B7213-C-T-P4S bearing
65mm x 120mm x 23mm
FAG B7013-E-T-P4S bearing
65mm x 100mm x 18mm
FAG B71913-E-T-P4S bearing
65mm x 90mm x 13mm
FAG B7213-E-T-P4S bearing
65mm x 120mm x 23mm
FAG HS7013-C-T-P4S bearing
65mm x 100mm x 18mm

FAG spindle bearings

Related Information

Product search