FAG HS7013-C-T-P4S Bearing

FAG HS7013-C-T-P4S spindle bearings | 65x100x18mm

Also known as : HS7013-C-T-P4S

• Inside Diameter: 65 mm
• Outside Diameter: 100 mm
• Width: 18 mm
• Basic dynamic load rating: 19.3 kN
• Basic static load rating: 13.4 kN

Inquire Now

FAG HS7013-C-T-P4S Bearing

Number	HS7013-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances
d	65 mm
D	100 mm
B	18 mm
a	20,1 mm
Da	93 mm	Tolerance: H12
da	72 mm	Tolerance: h12
Etk max	80,2 mm
Etk min	78,5 mm
Etk1 max	80,2 mm
Etk1 min	75,9 mm
r1 min	1,1 mm
ra max	1 mm
ra1 max	0,6 mm
rmin	1,1 mm
α	15 °	Contact angle
m	0,461 kg	≈ Mass
Cr	19300 N	Basic dynamic load rating, radial
C0r	13400 N	Basic static load rating, radial
Cur	1380 N	Fatigue limit load, radial
nG Fett	19000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	30000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	67 N	Preload force
FV M	201 N	Preload force
FV H	402 N	Preload force
KaE L	200 N	Lift-off force
KaE M	630 N	Lift-off force
KaE H	1312 N	Lift-off force
ca L	47,4 N/µm	Axial rigidity
ca M	74,4 N/µm	Axial rigidity
ca H	102 N/µm	Axial rigidity

Nodes bearings have FAG HS7013-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.