FAG B7015-C-T-P4S Bearing

FAG B7015-C-T-P4S spindle bearings | 75x115x20mm

Also known as : B7015-C-T-P4S

  • Inside Diameter: 75 mm
  • Outside Diameter: 115 mm
  • Width: 20 mm
  • Basic dynamic load rating: 52 kN
  • Basic static load rating: 32.5 kN

Inquire Now


FAG B7015-C-T-P4S Bearing

FAG B7015-C-T-P4S Bearing details

Number B7015-C-T-P4S  
Type FAG spindle bearings, adjusted, in pairs or sets  
d 75 mm   
D 115 mm   
B 20 mm   
a 22,7 mm   
Da 107 mm  Tolerance: H12
da 82 mm  Tolerance: h12
Etk max 91,7 mm   
Etk min 87,4 mm   
Etk1 max 91,7 mm   
Etk1 min 87,4 mm   
r1 min 1,1 mm   
ra max 1 mm   
ra1 max 0,6 mm   
rmin 1,1 mm   
α 15 °  Contact angle
m 0,62 kg  ≈ Mass
Cr 52000 N  Basic dynamic load rating, radial
C0r 32500 N  Basic static load rating, radial
Cur 3350 N  Fatigue limit load, radial
nG Fett 12000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
nG Öl 19000 1/min  Limiting speed for minimal quantity oil lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 280 N  Preload force
FV M 911 N  Preload force
FV H 1827 N  Preload force
KaE L 865 N  Lift-off force
KaE M 3043 N  Lift-off force
KaE H 6525 N  Lift-off force
ca L 76,3 N/µm  Axial rigidity
ca M 130 N/µm  Axial rigidity
ca H 186 N/µm  Axial rigidity

Nodes bearings have FAG B7015-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.

FAG B7015-C-T-P4S bearing cross reference

FAG B71915-C-T-P4S bearing
75mm x 105mm x 16mm
FAG B7215-C-T-P4S bearing
75mm x 130mm x 25mm
FAG B7015-E-T-P4S bearing
75mm x 115mm x 20mm
FAG B71915-E-T-P4S bearing
75mm x 105mm x 16mm
FAG B7215-E-T-P4S bearing
75mm x 130mm x 25mm
FAG HS7015-C-T-P4S bearing
75mm x 115mm x 20mm

FAG spindle bearings

Related Information

Product search