FAG B7215-C-T-P4S Bearing

FAG B7215-C-T-P4S spindle bearings | 75x130x25mm

Also known as : B7215-C-T-P4S

  • Inside Diameter: 75 mm
  • Outside Diameter: 130 mm
  • Width: 25 mm
  • Basic dynamic load rating: 73 kN
  • Basic static load rating: 44.5 kN

Inquire Now


FAG B7215-C-T-P4S Bearing

FAG B7215-C-T-P4S Bearing details

Number B7215-C-T-P4S  
Type FAG spindle bearings, adjusted, in pairs or sets  
d 75 mm   
D 130 mm   
B 25 mm   
a 26,2 mm   
Da 120 mm  Tolerance: H12
da 85 mm  Tolerance: h12
Etk max 98,5 mm   
Etk min 93 mm   
Etk1 max 98,5 mm   
Etk1 min 93 mm   
r1 min 1,5 mm   
ra max 1,5 mm   
ra1 max 0,6 mm   
rmin 1,5 mm   
α 15 °  Contact angle
m 1,2 kg  ≈ Mass
Cr 73000 N  Basic dynamic load rating, radial
C0r 44500 N  Basic static load rating, radial
Cur 4550 N  Fatigue limit load, radial
nG Fett 11000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
nG Öl 18000 1/min  Limiting speed for minimal quantity oil lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 413 N  Preload force
FV M 1314 N  Preload force
FV H 2617 N  Preload force
KaE L 1278 N  Lift-off force
KaE M 4401 N  Lift-off force
KaE H 9371 N  Lift-off force
ca L 87,2 N/µm  Axial rigidity
ca M 148 N/µm  Axial rigidity
ca H 210 N/µm  Axial rigidity

Nodes bearings have FAG B7215-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.

FAG B7215-C-T-P4S bearing cross reference

FAG B7015-C-T-P4S bearing
75mm x 115mm x 20mm
FAG B71915-C-T-P4S bearing
75mm x 105mm x 16mm
FAG B7015-E-T-P4S bearing
75mm x 115mm x 20mm
FAG B71915-E-T-P4S bearing
75mm x 105mm x 16mm
FAG B7215-E-T-P4S bearing
75mm x 130mm x 25mm
FAG HS7015-C-T-P4S bearing
75mm x 115mm x 20mm

FAG spindle bearings

Related Information

Product search