FAG B71936-E-T-P4S spindle bearings | 180x250x33mm
Also known as : B71936-E-T-P4S
- Inside Diameter: 180 mm
- Outside Diameter: 250 mm
- Width: 33 mm
- Basic dynamic load rating: 162 kN
- Basic static load rating: 138 kN
FAG B71936-E-T-P4S Bearing
FAG B71936-E-T-P4S Bearing details
| Number | B71936-E-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings, adjusted, in pairs or sets | |
| d | 180 mm | |
| D | 250 mm | |
| B | 33 mm | |
| a | 66,6 mm | |
| Da | 238 mm | Tolerance: H12 |
| da | 192 mm | Tolerance: h12 |
| Etk max | 209 mm | |
| Etk min | 201,6 mm | |
| Etk1 max | 209 mm | |
| Etk1 min | 201,6 mm | |
| r1 min | 1 mm | |
| ra max | 1 mm | |
| ra1 max | 1 mm | |
| rmin | 2 mm | |
| α | 25 ° | Contact angle |
| m | 4,12 kg | ≈ Mass |
| Cr | 162000 N | Basic dynamic load rating, radial |
| C0r | 138000 N | Basic static load rating, radial |
| Cur | 9700 N | Fatigue limit load, radial |
| nG Fett | 4500 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 7000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 1468 N | Preload force |
| FV M | 4890 N | Preload force |
| FV H | 10108 N | Preload force |
| KaE L | 4263 N | Lift-off force |
| KaE M | 14618 N | Lift-off force |
| KaE H | 31112 N | Lift-off force |
| ca L | 402 N/µm | Axial rigidity |
| ca M | 630 N/µm | Axial rigidity |
| ca H | 845 N/µm | Axial rigidity |
Nodes bearings have FAG B71936-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.
FAG B71936-E-T-P4S bearing cross reference
FAG B7036-C-T-P4S bearing
180mm x 280mm x 46mm
FAG B71936-C-T-P4S bearing
180mm x 250mm x 33mm
FAG B7236-C-T-P4S bearing
180mm x 320mm x 52mm
FAG B7036-E-T-P4S bearing
180mm x 280mm x 46mm