FAG B7236-C-T-P4S spindle bearings | 180x320x52mm
Also known as : B7236-C-T-P4S
- Inside Diameter: 180 mm
- Outside Diameter: 320 mm
- Width: 52 mm
- Basic dynamic load rating: 310 kN
- Basic static load rating: 270 kN
FAG B7236-C-T-P4S Bearing
FAG B7236-C-T-P4S Bearing details
| Number | B7236-C-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings, adjusted, in pairs or sets | |
| d | 180 mm | |
| D | 320 mm | |
| B | 52 mm | |
| a | 59,5 mm | |
| Da | 286,5 mm | Tolerance: H12 |
| da | 213,5 mm | Tolerance: h12 |
| Etk max | 240,4 mm | |
| Etk min | 227,1 mm | |
| Etk1 max | 240,4 mm | |
| Etk1 min | 227,1 mm | |
| r1 min | 4 mm | |
| ra max | 3 mm | |
| ra1 max | 3 mm | |
| rmin | 4 mm | |
| α | 15 ° | Contact angle |
| m | 16,4 kg | ≈ Mass |
| Cr | 310000 N | Basic dynamic load rating, radial |
| C0r | 270000 N | Basic static load rating, radial |
| Cur | 17600 N | Fatigue limit load, radial |
| nG Fett | 3800 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 5600 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 1891 N | Preload force |
| FV M | 5843 N | Preload force |
| FV H | 11625 N | Preload force |
| KaE L | 5771 N | Lift-off force |
| KaE M | 19076 N | Lift-off force |
| KaE H | 40296 N | Lift-off force |
| ca L | 197 N/µm | Axial rigidity |
| ca M | 323 N/µm | Axial rigidity |
| ca H | 453 N/µm | Axial rigidity |
Nodes bearings have FAG B7236-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.
FAG B7236-C-T-P4S bearing cross reference
FAG B7036-C-T-P4S bearing
180mm x 280mm x 46mm
FAG B71936-C-T-P4S bearing
180mm x 250mm x 33mm
FAG B7036-E-T-P4S bearing
180mm x 280mm x 46mm
FAG B71936-E-T-P4S bearing
180mm x 250mm x 33mm