FAG HSS71900-C-T-P4S Bearing

FAG HSS71900-C-T-P4S spindle bearings | 10x22x6mm

Also known as : HSS71900-C-T-P4S

  • Inside Diameter: 10 mm
  • Outside Diameter: 22 mm
  • Width: 6 mm
  • Basic dynamic load rating: 1.79 kN
  • Basic static load rating: 0.65 kN

Inquire Now

FAG HSS71900-C-T-P4S Bearing

FAG HSS71900-C-T-P4S Bearing details

Number HSS71900-C-T-P4S  
Type FAG spindle bearings
adjusted, in pairs or sets, contact angle a = 15°, lip seals on both sides, non-contact, restricted tolerances
 
d 10 mm   
D 22 mm   
B 6 mm   
a 5,1 mm   
Da 19,5 mm  Tolerance: H12
da 13 mm  Tolerance: h12
r1 min 0,3 mm   
ra max 0,3 mm   
ra1 max 0,1 mm   
rmin 0,3 mm   
α 15 °  Contact angle
m 0,012 kg  ≈ Mass
Cr 1790 N  Basic dynamic load rating, radial
C0r 650 N  Basic static load rating, radial
Cur 67 N  Fatigue limit load, radial
nG Fett 100000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 7 N  Preload force
FV M 20 N  Preload force
FV H 39 N  Preload force
KaE L 20 N  Lift-off force
KaE M 63 N  Lift-off force
KaE H 132 N  Lift-off force
ca L 8,8 N/µm  Axial rigidity
ca M 14,1 N/µm  Axial rigidity
ca H 19,6 N/µm  Axial rigidity

Nodes bearings have FAG HSS71900-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.

FAG HSS71900-C-T-P4S bearing cross reference

NSK 7900C bearing
10mm x 22mm x 6mm
NSK 7900CDB bearing
10mm x 22mm x 6mm
NSK 7900CDF bearing
10mm x 22mm x 6mm
NSK 7900A5DT bearing
10mm x 22mm x 6mm
NSK 7900CDT bearing
10mm x 22mm x 6mm
FAG B7000-C-T-P4S bearing
10mm x 26mm x 8mm
FAG B7200-C-T-P4S bearing
10mm x 30mm x 9mm
FAG B7000-E-T-P4S bearing
10mm x 26mm x 8mm
FAG B7200-E-T-P4S bearing
10mm x 30mm x 9mm

FAG spindle bearings

Related Information

Product search