As INA bearings distributor, Nodes have INA track roller bearings in stock. INA track rollers are self-retaining, single or double row units with particularly thick-walled outer rings. These INA bearings can support axial forces in both directions as well as high radial forces. Track rollers bearing outer rings have a crowned or cylindrical outside surface. Designs with a crowned outside surface are used where there is misalignment in relation to the raceway and edge stresses must be avoided. The track rollers are available with an inner ring, with a stud and with a plastic tyre on the outer ring.
INA NA22/6-2RSR Yoke type track rollers
Nodes bearings have INA NA22/6-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, NA22/6-2RSR bearings dimensions: 6mm x 19mm x 12mm, Cr: 3900N, C0r: 3700N.
- Brand: INA
- Inside Diameter: 6 mm
- Outside Diameter: 19 mm
- Width: 12 mm
- Basic dynamic load rating: 3.9 kN
- Basic static load rating: 3.9 kN
INA NA2200-2RSR Yoke type track rollers
Nodes bearings have INA NA2200-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, NA2200-2RSR bearings dimensions: 10mm x 30mm x 14mm, Cr: 7000N, C0r: 6900N.
- Brand: INA
- Inside Diameter: 10 mm
- Outside Diameter: 30 mm
- Width: 14 mm
- Basic dynamic load rating: 7 kN
- Basic static load rating: 7 kN
INA NA2201-2RSR Yoke type track rollers
Nodes bearings have INA NA2201-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, NA2201-2RSR bearings dimensions: 12mm x 32mm x 14mm, Cr: 7500N, C0r: 8300N.
- Brand: INA
- Inside Diameter: 12 mm
- Outside Diameter: 32 mm
- Width: 14 mm
- Basic dynamic load rating: 7.5 kN
- Basic static load rating: 7.5 kN
INA NA2202-2RSR Yoke type track rollers
Nodes bearings have INA NA2202-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, NA2202-2RSR bearings dimensions: 15mm x 35mm x 14mm, Cr: 7600N, C0r: 9800N.
- Brand: INA
- Inside Diameter: 15 mm
- Outside Diameter: 35 mm
- Width: 14 mm
- Basic dynamic load rating: 7.6 kN
- Basic static load rating: 7.6 kN
INA NA2203-2RSR Yoke type track rollers
Nodes bearings have INA NA2203-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, NA2203-2RSR bearings dimensions: 17mm x 40mm x 16mm, Cr: 9900N, C0r: 14000N.
- Brand: INA
- Inside Diameter: 17 mm
- Outside Diameter: 40 mm
- Width: 16 mm
- Basic dynamic load rating: 9.9 kN
- Basic static load rating: 9.9 kN
INA NA2204-2RSR Yoke type track rollers
Nodes bearings have INA NA2204-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, NA2204-2RSR bearings dimensions: 20mm x 47mm x 18mm, Cr: 14000N, C0r: 19100N.
- Brand: INA
- Inside Diameter: 20 mm
- Outside Diameter: 47 mm
- Width: 18 mm
- Basic dynamic load rating: 14 kN
- Basic static load rating: 14 kN
INA NA2205-2RSR Yoke type track rollers
Nodes bearings have INA NA2205-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, NA2205-2RSR bearings dimensions: 25mm x 52mm x 18mm, Cr: 14400N, C0r: 20800N.
- Brand: INA
- Inside Diameter: 25 mm
- Outside Diameter: 52 mm
- Width: 18 mm
- Basic dynamic load rating: 14.4 kN
- Basic static load rating: 14.4 kN
INA NA2206-2RSR Yoke type track rollers
Nodes bearings have INA NA2206-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, NA2206-2RSR bearings dimensions: 30mm x 62mm x 20mm, Cr: 17100N, C0r: 26000N.
- Brand: INA
- Inside Diameter: 30 mm
- Outside Diameter: 62 mm
- Width: 20 mm
- Basic dynamic load rating: 17.1 kN
- Basic static load rating: 17.1 kN
INA NA2207-2RSR Yoke type track rollers
Nodes bearings have INA NA2207-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, NA2207-2RSR bearings dimensions: 35mm x 72mm x 23mm, Cr: 21500N, C0r: 36000N.
- Brand: INA
- Inside Diameter: 35 mm
- Outside Diameter: 72 mm
- Width: 23 mm
- Basic dynamic load rating: 21.5 kN
- Basic static load rating: 21.5 kN
INA NA2208-2RSR Yoke type track rollers
Nodes bearings have INA NA2208-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, NA2208-2RSR bearings dimensions: 40mm x 80mm x 23mm, Cr: 26000N, C0r: 41000N.
- Brand: INA
- Inside Diameter: 40 mm
- Outside Diameter: 80 mm
- Width: 23 mm
- Basic dynamic load rating: 26 kN
- Basic static load rating: 26 kN
INA NA2210-2RSR Yoke type track rollers
Nodes bearings have INA NA2210-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, NA2210-2RSR bearings dimensions: 50mm x 90mm x 23mm, Cr: 26000N, C0r: 43000N.
- Brand: INA
- Inside Diameter: 50 mm
- Outside Diameter: 90 mm
- Width: 23 mm
- Basic dynamic load rating: 26 kN
- Basic static load rating: 26 kN
INA NATR8 Yoke type track rollers
Nodes bearings have INA NATR8 bearings in stock, Yoke type track rollers, with axial guidance, gap seals on both sides, NATR8 bearings dimensions: 8mm x 24mm x 15mm, Cr: 5500N, C0r: 6600N.
- Brand: INA
- Inside Diameter: 8 mm
- Outside Diameter: 24 mm
- Width: 15 mm
- Basic dynamic load rating: 5.5 kN
- Basic static load rating: 5.5 kN
INA NATR20 Yoke type track rollers
Nodes bearings have INA NATR20 bearings in stock, Yoke type track rollers, with axial guidance, gap seals on both sides, NATR20 bearings dimensions: 20mm x 47mm x 25mm, Cr: 15400N, C0r: 26000N.
- Brand: INA
- Inside Diameter: 20 mm
- Outside Diameter: 47 mm
- Width: 25 mm
- Basic dynamic load rating: 15.4 kN
- Basic static load rating: 15.4 kN
INA NATV5 Yoke type track rollers
Nodes bearings have INA NATV5 bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, gap seals on both sides, NATV5 bearings dimensions: 5mm x 16mm x 12mm, Cr: 4900N, C0r: 6600N.
- Brand: INA
- Inside Diameter: 5 mm
- Outside Diameter: 16 mm
- Width: 12 mm
- Basic dynamic load rating: 4.9 kN
- Basic static load rating: 4.9 kN
INA NATV6 Yoke type track rollers
Nodes bearings have INA NATV6 bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, gap seals on both sides, NATV6 bearings dimensions: 6mm x 19mm x 12mm, Cr: 5400N, C0r: 8000N.
- Brand: INA
- Inside Diameter: 6 mm
- Outside Diameter: 19 mm
- Width: 12 mm
- Basic dynamic load rating: 5.4 kN
- Basic static load rating: 5.4 kN
INA NATV12 Yoke type track rollers
Nodes bearings have INA NATV12 bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, gap seals on both sides, NATV12 bearings dimensions: 12mm x 32mm x 15mm, Cr: 9700N, C0r: 15700N.
- Brand: INA
- Inside Diameter: 12 mm
- Outside Diameter: 32 mm
- Width: 15 mm
- Basic dynamic load rating: 9.7 kN
- Basic static load rating: 9.7 kN
INA NATV20 Yoke type track rollers
Nodes bearings have INA NATV20 bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, gap seals on both sides, NATV20 bearings dimensions: 20mm x 47mm x 25mm, Cr: 20300N, C0r: 42000N.
- Brand: INA
- Inside Diameter: 20 mm
- Outside Diameter: 47 mm
- Width: 25 mm
- Basic dynamic load rating: 20.3 kN
- Basic static load rating: 20.3 kN
INA NATR8-PP Yoke type track rollers
Nodes bearings have INA NATR8-PP bearings in stock, Yoke type track rollers, with axial guidance, axial plain washers on both sides, NATR8-PP bearings dimensions: 8mm x 24mm x 15mm, Cr: 5500N, C0r: 6600N.
- Brand: INA
- Inside Diameter: 8 mm
- Outside Diameter: 24 mm
- Width: 15 mm
- Basic dynamic load rating: 5.5 kN
- Basic static load rating: 5.5 kN
INA NATR17-PP Yoke type track rollers
Nodes bearings have INA NATR17-PP bearings in stock, Yoke type track rollers, with axial guidance, axial plain washers on both sides, NATR17-PP bearings dimensions: 17mm x 40mm x 21mm, Cr: 10900N, C0r: 15800N.
- Brand: INA
- Inside Diameter: 17 mm
- Outside Diameter: 40 mm
- Width: 21 mm
- Basic dynamic load rating: 10.9 kN
- Basic static load rating: 10.9 kN
INA NATR20-PP Yoke type track rollers
Nodes bearings have INA NATR20-PP bearings in stock, Yoke type track rollers, with axial guidance, axial plain washers on both sides, NATR20-PP bearings dimensions: 20mm x 47mm x 25mm, Cr: 15400N, C0r: 26000N.
- Brand: INA
- Inside Diameter: 20 mm
- Outside Diameter: 47 mm
- Width: 25 mm
- Basic dynamic load rating: 15.4 kN
- Basic static load rating: 15.4 kN