INA track roller bearings catalogue

INA track rollers

As INA bearings distributor, Nodes have INA track roller bearings in stock. INA track rollers are self-retaining, single or double row units with particularly thick-walled outer rings. These INA bearings can support axial forces in both directions as well as high radial forces. Track rollers bearing outer rings have a crowned or cylindrical outside surface. Designs with a crowned outside surface are used where there is misalignment in relation to the raceway and edge stresses must be avoided. The track rollers are available with an inner ring, with a stud and with a plastic tyre on the outer ring.

Displaying 88 INA track rollers.
INA

INA NUTR2562 Yoke type track rollers

Nodes bearings have INA NUTR2562 bearings in stock, Yoke type track rollers, NUTR2562 bearings dimensions: 25mm x 62mm x 25mm, Cr: 35500N, C0r: 54000N, full complement cylindrical roller set, with axial guidance, labyrinth seals on both sides.

Inquire Now

  • Brand: INA
  • Inside Diameter: 25 mm
  • Outside Diameter: 62 mm
  • Width: 25 mm
  • Basic dynamic load rating: 35.5 kN
  • Basic static load rating: 35.5 kN
INA

INA NUTR2052 Yoke type track rollers

Nodes bearings have INA NUTR2052 bearings in stock, Yoke type track rollers, NUTR2052 bearings dimensions: 20mm x 52mm x 25mm, Cr: 32000N, C0r: 44000N, full complement cylindrical roller set, with axial guidance, labyrinth seals on both sides.

Inquire Now

  • Brand: INA
  • Inside Diameter: 20 mm
  • Outside Diameter: 52 mm
  • Width: 25 mm
  • Basic dynamic load rating: 32 kN
  • Basic static load rating: 32 kN
INA

INA PWTR25-2RS-XL Yoke type track rollers

Nodes bearings have INA PWTR25-2RS-XL bearings in stock, Yoke type track rollers, PWTR25-2RS-XL bearings dimensions: 25mm x 52mm x 25mm, Cr: 25000N, C0r: 33000N, full complement cylindrical roller set, with axial guidance, lip seals on both sides.

Inquire Now

  • Brand: INA
  • Inside Diameter: 25 mm
  • Outside Diameter: 52 mm
  • Width: 25 mm
  • Basic dynamic load rating: 25 kN
  • Basic static load rating: 25 kN
INA

INA LR608-2RSR track rollers

INA LR608-2RSR track rollers, Brand: INA, sealed on both sides, Dimensions: 8mm x 24mm x 7mm, Crw: 2950N, C0rw: 1240N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 8 mm
  • Outside Diameter: 24 mm
  • Width: 7 mm
  • Basic dynamic load rating: 2.95 kN
  • Basic static load rating: 2.95 kN
INA

INA LR606-2RSR track rollers

INA LR606-2RSR track rollers, Brand: INA, sealed on both sides, Dimensions: 6mm x 19mm x 6mm, Crw: 1940N, C0rw: 790N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 6 mm
  • Outside Diameter: 19 mm
  • Width: 6 mm
  • Basic dynamic load rating: 1.94 kN
  • Basic static load rating: 1.94 kN
INA

INA NATV6-PP Yoke type track rollers

Nodes bearings have INA NATV6-PP bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, axial plain washers on both sides, NATV6-PP bearings dimensions: 6mm x 19mm x 12mm, Cr: 5400N, C0r: 8000N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 6 mm
  • Outside Diameter: 19 mm
  • Width: 12 mm
  • Basic dynamic load rating: 5.4 kN
  • Basic static load rating: 5.4 kN
INA

INA LR5200-2Z-TVH-XL track rollers

INA LR5200-2Z-TVH-XL track rollers, Brand: INA, double row, sealed on both sides, Dimensions: 10mm x 32mm x 14mm, Crw: 7200N, C0rw: 4800N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 10 mm
  • Outside Diameter: 32 mm
  • Width: 14 mm
  • Basic dynamic load rating: 7.2 kN
  • Basic static load rating: 7.2 kN
INA

INA NATR5 Yoke type track rollers

Nodes bearings have INA NATR5 bearings in stock, Yoke type track rollers, with axial guidance, gap seals on both sides, NATR5 bearings dimensions: 5mm x 16mm x 12mm, Cr: 3150N, C0r: 3350N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 5 mm
  • Outside Diameter: 16 mm
  • Width: 12 mm
  • Basic dynamic load rating: 3.15 kN
  • Basic static load rating: 3.15 kN
INA

INA NATR6 Yoke type track rollers

Nodes bearings have INA NATR6 bearings in stock, Yoke type track rollers, with axial guidance, gap seals on both sides, NATR6 bearings dimensions: 6mm x 19mm x 12mm, Cr: 3500N, C0r: 4000N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 6 mm
  • Outside Diameter: 19 mm
  • Width: 12 mm
  • Basic dynamic load rating: 3.5 kN
  • Basic static load rating: 3.5 kN
INA

INA NATR10 Yoke type track rollers

Nodes bearings have INA NATR10 bearings in stock, Yoke type track rollers, with axial guidance, gap seals on both sides, NATR10 bearings dimensions: 10mm x 30mm x 15mm, Cr: 6800N, C0r: 8600N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 10 mm
  • Outside Diameter: 30 mm
  • Width: 15 mm
  • Basic dynamic load rating: 6.8 kN
  • Basic static load rating: 6.8 kN
INA

INA NATR12 Yoke type track rollers

Nodes bearings have INA NATR12 bearings in stock, Yoke type track rollers, with axial guidance, gap seals on both sides, NATR12 bearings dimensions: 12mm x 32mm x 15mm, Cr: 7000N, C0r: 9000N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 12 mm
  • Outside Diameter: 32 mm
  • Width: 15 mm
  • Basic dynamic load rating: 7 kN
  • Basic static load rating: 7 kN
INA

INA NATR15 Yoke type track rollers

Nodes bearings have INA NATR15 bearings in stock, Yoke type track rollers, with axial guidance, gap seals on both sides, NATR15 bearings dimensions: 15mm x 35mm x 19mm, Cr: 9700N, C0r: 14300N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 15 mm
  • Outside Diameter: 35 mm
  • Width: 19 mm
  • Basic dynamic load rating: 9.7 kN
  • Basic static load rating: 9.7 kN
INA

INA NATR17 Yoke type track rollers

Nodes bearings have INA NATR17 bearings in stock, Yoke type track rollers, with axial guidance, gap seals on both sides, NATR17 bearings dimensions: 17mm x 40mm x 21mm, Cr: 10900N, C0r: 15800N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 17 mm
  • Outside Diameter: 40 mm
  • Width: 21 mm
  • Basic dynamic load rating: 10.9 kN
  • Basic static load rating: 10.9 kN
INA

INA NATR25 Yoke type track rollers

Nodes bearings have INA NATR25 bearings in stock, Yoke type track rollers, with axial guidance, gap seals on both sides, NATR25 bearings dimensions: 25mm x 52mm x 25mm, Cr: 15300N, C0r: 27000N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 25 mm
  • Outside Diameter: 52 mm
  • Width: 25 mm
  • Basic dynamic load rating: 15.3 kN
  • Basic static load rating: 15.3 kN
INA

INA NATR30 Yoke type track rollers

Nodes bearings have INA NATR30 bearings in stock, Yoke type track rollers, with axial guidance, gap seals on both sides, NATR30 bearings dimensions: 30mm x 62mm x 29mm, Cr: 23200N, C0r: 39000N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 30 mm
  • Outside Diameter: 62 mm
  • Width: 29 mm
  • Basic dynamic load rating: 23.2 kN
  • Basic static load rating: 23.2 kN
INA

INA NATV8 Yoke type track rollers

Nodes bearings have INA NATV8 bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, gap seals on both sides, NATV8 bearings dimensions: 8mm x 24mm x 15mm, Cr: 7800N, C0r: 11600N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 8 mm
  • Outside Diameter: 24 mm
  • Width: 15 mm
  • Basic dynamic load rating: 7.8 kN
  • Basic static load rating: 7.8 kN
INA

INA NATV10 Yoke type track rollers

Nodes bearings have INA NATV10 bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, gap seals on both sides, NATV10 bearings dimensions: 10mm x 30mm x 15mm, Cr: 9500N, C0r: 14900N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 10 mm
  • Outside Diameter: 30 mm
  • Width: 15 mm
  • Basic dynamic load rating: 9.5 kN
  • Basic static load rating: 9.5 kN
INA

INA NATV15 Yoke type track rollers

Nodes bearings have INA NATV15 bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, gap seals on both sides, NATV15 bearings dimensions: 15mm x 35mm x 19mm, Cr: 12600N, C0r: 23100N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 15 mm
  • Outside Diameter: 35 mm
  • Width: 19 mm
  • Basic dynamic load rating: 12.6 kN
  • Basic static load rating: 12.6 kN
INA

INA NATV17 Yoke type track rollers

Nodes bearings have INA NATV17 bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, gap seals on both sides, NATV17 bearings dimensions: 17mm x 40mm x 21mm, Cr: 14700N, C0r: 26500N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 17 mm
  • Outside Diameter: 40 mm
  • Width: 21 mm
  • Basic dynamic load rating: 14.7 kN
  • Basic static load rating: 14.7 kN
INA

INA NATV25 Yoke type track rollers

Nodes bearings have INA NATV25 bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, gap seals on both sides, NATV25 bearings dimensions: 25mm x 52mm x 25mm, Cr: 20200N, C0r: 44000N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 25 mm
  • Outside Diameter: 52 mm
  • Width: 25 mm
  • Basic dynamic load rating: 20.2 kN
  • Basic static load rating: 20.2 kN
INA

INA NATV30 Yoke type track rollers

Nodes bearings have INA NATV30 bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, gap seals on both sides, NATV30 bearings dimensions: 30mm x 62mm x 29mm, Cr: 30000N, C0r: 62000N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 30 mm
  • Outside Diameter: 62 mm
  • Width: 29 mm
  • Basic dynamic load rating: 30 kN
  • Basic static load rating: 30 kN
INA

INA NATR5-PP Yoke type track rollers

Nodes bearings have INA NATR5-PP bearings in stock, Yoke type track rollers, with axial guidance, axial plain washers on both sides, NATR5-PP bearings dimensions: 5mm x 16mm x 12mm, Cr: 3150N, C0r: 3350N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 5 mm
  • Outside Diameter: 16 mm
  • Width: 12 mm
  • Basic dynamic load rating: 3.15 kN
  • Basic static load rating: 3.15 kN
INA

INA NATR6-PP Yoke type track rollers

Nodes bearings have INA NATR6-PP bearings in stock, Yoke type track rollers, with axial guidance, axial plain washers on both sides, NATR6-PP bearings dimensions: 6mm x 19mm x 12mm, Cr: 3500N, C0r: 4000N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 6 mm
  • Outside Diameter: 19 mm
  • Width: 12 mm
  • Basic dynamic load rating: 3.5 kN
  • Basic static load rating: 3.5 kN
INA

INA NATR10-PP Yoke type track rollers

Nodes bearings have INA NATR10-PP bearings in stock, Yoke type track rollers, with axial guidance, axial plain washers on both sides, NATR10-PP bearings dimensions: 10mm x 30mm x 15mm, Cr: 6800N, C0r: 8600N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 10 mm
  • Outside Diameter: 30 mm
  • Width: 15 mm
  • Basic dynamic load rating: 6.8 kN
  • Basic static load rating: 6.8 kN
INA

INA NATR12-PP Yoke type track rollers

Nodes bearings have INA NATR12-PP bearings in stock, Yoke type track rollers, with axial guidance, axial plain washers on both sides, NATR12-PP bearings dimensions: 12mm x 32mm x 15mm, Cr: 7000N, C0r: 9000N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 12 mm
  • Outside Diameter: 32 mm
  • Width: 15 mm
  • Basic dynamic load rating: 7 kN
  • Basic static load rating: 7 kN
INA

INA NATR15-PP Yoke type track rollers

Nodes bearings have INA NATR15-PP bearings in stock, Yoke type track rollers, with axial guidance, axial plain washers on both sides, NATR15-PP bearings dimensions: 15mm x 35mm x 19mm, Cr: 9700N, C0r: 14300N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 15 mm
  • Outside Diameter: 35 mm
  • Width: 19 mm
  • Basic dynamic load rating: 9.7 kN
  • Basic static load rating: 9.7 kN
INA

INA NATR25-PP Yoke type track rollers

Nodes bearings have INA NATR25-PP bearings in stock, Yoke type track rollers, with axial guidance, axial plain washers on both sides, NATR25-PP bearings dimensions: 25mm x 52mm x 25mm, Cr: 15300N, C0r: 27000N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 25 mm
  • Outside Diameter: 52 mm
  • Width: 25 mm
  • Basic dynamic load rating: 15.3 kN
  • Basic static load rating: 15.3 kN
INA

INA NATR35-PP Yoke type track rollers

Nodes bearings have INA NATR35-PP bearings in stock, Yoke type track rollers, with axial guidance, axial plain washers on both sides, NATR35-PP bearings dimensions: 35mm x 72mm x 29mm, Cr: 24800N, C0r: 44500N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 35 mm
  • Outside Diameter: 72 mm
  • Width: 29 mm
  • Basic dynamic load rating: 24.8 kN
  • Basic static load rating: 24.8 kN
INA

INA NNTR70X180X85-2ZL Yoke type track rollers

Nodes bearings have INA NNTR70X180X85-2ZL bearings in stock, Yoke type track rollers, NNTR70X180X85-2ZL bearings dimensions: 70mm x 180mm x 85mm, Cr: 355000N, C0r: 510000N, Full complement roller set, axial guidance, central rib, sealing shields with

Inquire Now

  • Brand: INA
  • Inside Diameter: 70 mm
  • Outside Diameter: 180 mm
  • Width: 85 mm
  • Basic dynamic load rating: 355 kN
  • Basic static load rating: 355 kN
INA

INA NATV8-PP Yoke type track rollers

Nodes bearings have INA NATV8-PP bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, axial plain washers on both sides, NATV8-PP bearings dimensions: 8mm x 24mm x 15mm, Cr: 7800N, C0r: 11600N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 8 mm
  • Outside Diameter: 24 mm
  • Width: 15 mm
  • Basic dynamic load rating: 7.8 kN
  • Basic static load rating: 7.8 kN
INA

INA NATV10-PP Yoke type track rollers

Nodes bearings have INA NATV10-PP bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, axial plain washers on both sides, NATV10-PP bearings dimensions: 10mm x 30mm x 15mm, Cr: 9500N, C0r: 14900N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 10 mm
  • Outside Diameter: 30 mm
  • Width: 15 mm
  • Basic dynamic load rating: 9.5 kN
  • Basic static load rating: 9.5 kN
INA

INA NATV15-PP Yoke type track rollers

Nodes bearings have INA NATV15-PP bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, axial plain washers on both sides, NATV15-PP bearings dimensions: 15mm x 35mm x 19mm, Cr: 12600N, C0r: 23100N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 15 mm
  • Outside Diameter: 35 mm
  • Width: 19 mm
  • Basic dynamic load rating: 12.6 kN
  • Basic static load rating: 12.6 kN
INA

INA NATV17-PP Yoke type track rollers

Nodes bearings have INA NATV17-PP bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, axial plain washers on both sides, NATV17-PP bearings dimensions: 17mm x 40mm x 21mm, Cr: 14700N, C0r: 26500N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 17 mm
  • Outside Diameter: 40 mm
  • Width: 21 mm
  • Basic dynamic load rating: 14.7 kN
  • Basic static load rating: 14.7 kN
INA

INA NATV25-PP Yoke type track rollers

Nodes bearings have INA NATV25-PP bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, axial plain washers on both sides, NATV25-PP bearings dimensions: 25mm x 52mm x 25mm, Cr: 20200N, C0r: 44000N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 25 mm
  • Outside Diameter: 52 mm
  • Width: 25 mm
  • Basic dynamic load rating: 20.2 kN
  • Basic static load rating: 20.2 kN
INA

INA NATV50-PP Yoke type track rollers

Nodes bearings have INA NATV50-PP bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, axial plain washers on both sides, NATV50-PP bearings dimensions: 50mm x 90mm x 32mm, Cr: 39000N, C0r: 92000N.

Inquire Now

  • Brand: INA
  • Inside Diameter: 50 mm
  • Outside Diameter: 90 mm
  • Width: 32 mm
  • Basic dynamic load rating: 39 kN
  • Basic static load rating: 39 kN
INA

INA PWTR17-2RS-XL Yoke type track rollers

Nodes bearings have INA PWTR17-2RS-XL bearings in stock, Yoke type track rollers, PWTR17-2RS-XL bearings dimensions: 17mm x 40mm x 21mm, Cr: 14300N, C0r: 17900N, full complement cylindrical roller set, with axial guidance, lip seals on both sides.

Inquire Now

  • Brand: INA
  • Inside Diameter: 17 mm
  • Outside Diameter: 40 mm
  • Width: 21 mm
  • Basic dynamic load rating: 14.3 kN
  • Basic static load rating: 14.3 kN
INA

INA PWTR20-2RS-XL Yoke type track rollers

Nodes bearings have INA PWTR20-2RS-XL bearings in stock, Yoke type track rollers, PWTR20-2RS-XL bearings dimensions: 20mm x 47mm x 25mm, Cr: 24500N, C0r: 30500N, full complement cylindrical roller set, with axial guidance, lip seals on both sides.

Inquire Now

  • Brand: INA
  • Inside Diameter: 20 mm
  • Outside Diameter: 47 mm
  • Width: 25 mm
  • Basic dynamic load rating: 24.5 kN
  • Basic static load rating: 24.5 kN
INA

INA PWTR30-2RS-XL Yoke type track rollers

Nodes bearings have INA PWTR30-2RS-XL bearings in stock, Yoke type track rollers, PWTR30-2RS-XL bearings dimensions: 30mm x 62mm x 29mm, Cr: 35000N, C0r: 45500N, full complement cylindrical roller set, with axial guidance, lip seals on both sides.

Inquire Now

  • Brand: INA
  • Inside Diameter: 30 mm
  • Outside Diameter: 62 mm
  • Width: 29 mm
  • Basic dynamic load rating: 35 kN
  • Basic static load rating: 35 kN