FAG QJ1019-XL-N2-MPA bearings | Dimensions: 95x145x24mm
Also known as : QJ1019-XL-N2-MPA
- Inside Diameter: 95 mm
- Outside Diameter: 145 mm
- Width: 24 mm
- Basic dynamic load rating: 106 kN
- Basic static load rating: 121 kN
FAG QJ1019-XL-N2-MPA Bearing
FAG QJ1019-XL-N2-MPA Bearing details
| Number | QJ1019-XL-N2-MPA | |
|---|---|---|
| Type |
Four point contact bearings main dimensions to DIN 628-4, can be dismantled, with split inner ring, with two retaining slots |
|
| d | 95mm | |
| D | 145mm | |
| B | 24mm | |
| 45° | Groove angle | |
| a | 84mm | |
| an | 5mm | |
| bn | 6,5mm | |
| D1 | 128,1mm | |
| Da max | 138mm | |
| d1 | 112,9mm | |
| da min | 102mm | |
| ra max | 1,5mm | |
| rmin | 1,5mm | |
| rn | 0,5mm | |
| α | 35° | Contact angle |
| m | 1,56kg | Mass |
| Cr | 106000N | Basic dynamic load rating, radial |
| C0r | 121000N | Basic static load rating, radial |
| Cur | 7600N | Fatigue limit load, radial |
| nG | 82001/min | Limiting speed |
| nϑr | 38501/min | Reference speed |
Nodes bearings have FAG QJ1019-XL-N2-MPA bearings in stock, FAG bearings, main dimensions to DIN 628-4, can be dismantled, with split inner ring, with two retaining slots.
FAG QJ1019-XL-N2-MPA bearing cross reference
FAG 7219-B-XL-MP bearing
95mm x 170mm x 32mm
FAG 7219-B-XL-TVP bearing
95mm x 170mm x 32mm
FAG 7319-B-XL-JP bearing
95mm x 200mm x 45mm
FAG 7319-B-XL-MP bearing
95mm x 200mm x 45mm
FAG 7319-B-XL-TVP bearing
95mm x 200mm x 45mm
NSK QJ1019 bearing
95mm x 145mm x 24mm
FAG B7019-C-T-P4S bearing
95mm x 145mm x 24mm
FAG B71919-C-T-P4S bearing
95mm x 130mm x 18mm
FAG B7219-C-T-P4S bearing
95mm x 170mm x 32mm
FAG B7019-E-T-P4S bearing
95mm x 145mm x 24mm
FAG B71919-E-T-P4S bearing
95mm x 130mm x 18mm