FAG B71919-C-T-P4S Bearing

FAG B71919-C-T-P4S spindle bearings | 95x130x18mm

Also known as : B71919-C-T-P4S

  • Inside Diameter: 95 mm
  • Outside Diameter: 130 mm
  • Width: 18 mm
  • Basic dynamic load rating: 48.5 kN
  • Basic static load rating: 36.5 kN

Inquire Now

FAG B71919-C-T-P4S Bearing

FAG B71919-C-T-P4S Bearing details

Number B71919-C-T-P4S  
Type FAG spindle bearings, adjusted, in pairs or sets  
d 95 mm   
D 130 mm   
B 18 mm   
a 24,1 mm   
Da 124 mm  Tolerance: H12
da 102 mm  Tolerance: h12
Etk max 109,2 mm   
Etk min 105,9 mm   
Etk1 max 109,2 mm   
Etk1 min 105,9 mm   
r1 min 1,1 mm   
ra max 0,6 mm   
ra1 max 0,6 mm   
rmin 1,1 mm   
α 15 °  Contact angle
m 0,58 kg  ≈ Mass
Cr 48500 N  Basic dynamic load rating, radial
C0r 36500 N  Basic static load rating, radial
Cur 3550 N  Fatigue limit load, radial
nG Fett 10000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
nG Öl 16000 1/min  Limiting speed for minimal quantity oil lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 243 N  Preload force
FV M 813 N  Preload force
FV H 1651 N  Preload force
KaE L 743 N  Lift-off force
KaE M 2679 N  Lift-off force
KaE H 5806 N  Lift-off force
ca L 84,4 N/µm  Axial rigidity
ca M 144 N/µm  Axial rigidity
ca H 206 N/µm  Axial rigidity

Nodes bearings have FAG B71919-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.

FAG B71919-C-T-P4S bearing cross reference

FAG B7019-C-T-P4S bearing
95mm x 145mm x 24mm
FAG B7219-C-T-P4S bearing
95mm x 170mm x 32mm
FAG B7019-E-T-P4S bearing
95mm x 145mm x 24mm
FAG B71919-E-T-P4S bearing
95mm x 130mm x 18mm
FAG B7219-E-T-P4S bearing
95mm x 170mm x 32mm
FAG HS7019-C-T-P4S bearing
95mm x 145mm x 24mm
FAG HS71919-C-T-P4S bearing
95mm x 130mm x 18mm
FAG HS7019-E-T-P4S bearing
95mm x 145mm x 24mm

FAG spindle bearings

Related Information

Product search