FAG B71919-C-2RSD-T-P4S Bearing

FAG B71919-C-2RSD-T-P4S spindle bearings | 95x130x18mm

Also known as : B71919-C-2RSD-T-P4S

  • Inside Diameter: 95 mm
  • Outside Diameter: 130 mm
  • Width: 18 mm
  • Basic dynamic load rating: 48.5 kN
  • Basic static load rating: 36.5 kN

Inquire Now


FAG B71919-C-2RSD-T-P4S Bearing

FAG B71919-C-2RSD-T-P4S Bearing details

Number B71919-C-2RSD-T-P4S  
Type FAG spindle bearings, adjusted, in pairs or sets  
d 95 mm   
D 130 mm   
B 18 mm   
a 24,1 mm   
Da 124 mm  Tolerance: H12
da 102 mm  Tolerance: h12
r1 min 1,1 mm   
ra max 0,6 mm   
ra1 max 0,6 mm   
rmin 1,1 mm   
α 15 °  Contact angle
m 0,58 kg  ≈ Mass
Cr 48500 N  Basic dynamic load rating, radial
C0r 36500 N  Basic static load rating, radial
Cur 3550 N  Fatigue limit load, radial
nG Fett 10000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 243 N  Preload force
FV M 813 N  Preload force
FV H 1651 N  Preload force
KaE L 743 N  Lift-off force
KaE M 2679 N  Lift-off force
KaE H 5806 N  Lift-off force
ca L 84,4 N/µm  Axial rigidity
ca M 144 N/µm  Axial rigidity
ca H 206 N/µm  Axial rigidity

Nodes bearings have FAG B71919-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.

FAG B71919-C-2RSD-T-P4S bearing cross reference

FAG B7019-C-T-P4S bearing
95mm x 145mm x 24mm
FAG B71919-C-T-P4S bearing
95mm x 130mm x 18mm
FAG B7219-C-T-P4S bearing
95mm x 170mm x 32mm
FAG B7019-E-T-P4S bearing
95mm x 145mm x 24mm
FAG B71919-E-T-P4S bearing
95mm x 130mm x 18mm
FAG B7219-E-T-P4S bearing
95mm x 170mm x 32mm
FAG HS7019-C-T-P4S bearing
95mm x 145mm x 24mm
FAG HS71919-C-T-P4S bearing
95mm x 130mm x 18mm
FAG HS7019-E-T-P4S bearing
95mm x 145mm x 24mm

FAG spindle bearings

Related Information

Product search