FAG HS71915-C-T-P4S Bearing

FAG HS71915-C-T-P4S spindle bearings | 75x105x16mm

Also known as : HS71915-C-T-P4S

• Inside Diameter: 75 mm
• Outside Diameter: 105 mm
• Width: 16 mm
• Basic dynamic load rating: 18.3 kN
• Basic static load rating: 13.8 kN

Inquire Now

FAG HS71915-C-T-P4S Bearing

Number	HS71915-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances
d	75 mm
D	105 mm
B	16 mm
a	20,1 mm
Da	99,5 mm	Tolerance: H12
da	81 mm	Tolerance: h12
Etk max	87,5 mm
Etk min	86,2 mm
Etk1 max	87,5 mm
Etk1 min	83,9 mm
r1 min	1 mm
ra max	0,6 mm
ra1 max	0,3 mm
rmin	1 mm
α	15 °	Contact angle
m	0,374 kg	≈ Mass
Cr	18300 N	Basic dynamic load rating, radial
C0r	13800 N	Basic static load rating, radial
Cur	1420 N	Fatigue limit load, radial
nG Fett	18000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	28000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	64 N	Preload force
FV M	191 N	Preload force
FV H	382 N	Preload force
KaE L	190 N	Lift-off force
KaE M	597 N	Lift-off force
KaE H	1242 N	Lift-off force
ca L	49,5 N/µm	Axial rigidity
ca M	77,5 N/µm	Axial rigidity
ca H	106 N/µm	Axial rigidity

Nodes bearings have FAG HS71915-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.