FAG HSS71919-C-T-P4S Bearing

FAG HSS71919-C-T-P4S spindle bearings | 95x130x18mm

Also known as : HSS71919-C-T-P4S

  • Inside Diameter: 95 mm
  • Outside Diameter: 130 mm
  • Width: 18 mm
  • Basic dynamic load rating: 23.9 kN
  • Basic static load rating: 19.9 kN

Inquire Now


FAG HSS71919-C-T-P4S Bearing

FAG HSS71919-C-T-P4S Bearing details

NumberHSS71919-C-T-P4S
TypeFAG spindle bearings
adjusted, in pairs or sets, contact angle a = 15°, lip seals on both sides, non-contact, restricted tolerances
d95 mm  
D130 mm  
B18 mm  
a24,1 mm  
Da124 mm Tolerance: H12
da102 mm Tolerance: h12
r1 min1,1 mm  
ra max0,6 mm  
ra1 max0,6 mm  
rmin1,1 mm  
α15 ° Contact angle
m0,674 kg ≈ Mass
Cr23900 N Basic dynamic load rating, radial
C0r19900 N Basic static load rating, radial
Cur1930 N Fatigue limit load, radial
nG Fett14000 1/min Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L82 N Preload force
FV M246 N Preload force
FV H492 N Preload force
KaE L244 N Lift-off force
KaE M766 N Lift-off force
KaE H1593 N Lift-off force
ca L60 N/µm Axial rigidity
ca M93,7 N/µm Axial rigidity
ca H127 N/µm Axial rigidity

Nodes bearings have FAG HSS71919-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.

FAG HSS71919-C-T-P4S bearing cross reference

NSK 7919C bearing
95mm x 130mm x 18mm
NSK 7919CDB bearing
95mm x 130mm x 18mm
NSK 7919CDF bearing
95mm x 130mm x 18mm
NSK 7919A5DT bearing
95mm x 130mm x 18mm
NSK 7919CDT bearing
95mm x 130mm x 18mm
FAG B7019-C-T-P4S bearing
95mm x 145mm x 24mm
FAG B71919-C-T-P4S bearing
95mm x 130mm x 18mm
FAG B7219-C-T-P4S bearing
95mm x 170mm x 32mm
FAG B7019-E-T-P4S bearing
95mm x 145mm x 24mm
FAG B71919-E-T-P4S bearing
95mm x 130mm x 18mm
FAG B7219-E-T-P4S bearing
95mm x 170mm x 32mm

FAG spindle bearings

Related Information

Product search