NSK bearing arrangement

In general, shafts are supported by only two bearings. When considering the bearing mounting arrangement, the following items must be investigated: Expansion and contraction of the shaft caused by temperature variations. Ease of bearing mounting and...

Date: 2018-10-25

SKF bushing arrangements

The factors that are most important to consider when selecting the material and surface finish of the counter surface on which the SKF bushing slides are the load conditions such as load, angle of oscillation, type of movement, and environmental infl...

Date: 2018-10-25

The necessity of a proper fit of NTN bearings

For NTN rolling bearings, inner and outer rings are fixed on the shaft or in the housing so that relative movement does not occur between fitting surfaces during operation or under load. This relative movement between the fitting surfaces of the NTN...

Date: 2018-10-23

Design of Shafts and Housings

Design of shafts and housings For optimum operation and performance - Accuracy of the shaft shoulder, Accuracy of the shoulder and fillet radii...

Date: 2017-12-18

Conditions of bearing rotation

he conditions of rotation indicate the motion of one bearing ring with respect to the load direction and are expressed as either circumferential load or point load Point load If the ring remains stationary relative to the load direction, there are no...

Date: 2017-12-18