Operating Temperature Range
The maximum allowable temperature for Lubrication type IKO PILLOBALLs is +180 °C for the insert type and +80 °C for the die-cast type.
The maximum allowable temperature for Maintenancefree type PILLOBALL Rod Ends is +150 °C.
Tightening depth
The recommended tightening depth of the screw into the PILLOBALL Rod End body is shown below.
Insert type and maintenance-free type: 1.25 times the nominal thread dia. or more.
Die-cast type: 2 times the nominal thread dia. or more.
Allowable tilting angle
|
d |
PH, PHS, POS, PHS...EC, POS...EC | PHSA | ||
|---|---|---|---|---|
| a1 | a2 | a1 | a2 | |
| 3 | 7 | 13 | - | - |
| 4 | 7 | 13 | - | - |
| 5 | 8 | 13 | 7 | 13 |
| 6 | 8 | 13 | 7 | 13 |
| 8 | 8 | 14 | 8 | 14 |
| 10 | 8 | 14 | 8 | 14 |
| 12 | 8 | 13 | 8 | 13 |
| 14 | 10 | 16 | 9 | 16 |
| 16 | 9 | 15 | 9 | 15 |
| 18 | 9 | 15 | 9 | 15 |
| 20 | 9 | 15 | 9 | 15 |
| 22 | 10 | 15 | 9 | 15 |
| 25 | 9 | 15 | - | - |
| 28 | 9 | 15 | - | - |
| 30 | 10 | 17 | - | - |
| With female thread | with male thread | a1 | a2 |
|---|---|---|---|
| PHSB 2 | POSB 2 | 8 | 16 |
| PHSB 2.5 | POSB 2.5 | 7 | 12 |
| PHSB 3 | POSB 3 | 6 | 10 |
| PHSB 4 | POSB 4 | 7 | 13 |
| PHSB 5 | POSB 5 | 6 | 10 |
| PHSB 6 | POSB 6 | 6 | 11 |
| PHSB 7 | POSB 7 | 7 | 11 |
| PHSB 8 | POSB 8 | 6 | 9 |
| PHSB 10 | POSB 10 | 7 | 11 |
| PHSB 12 | POSB 12 | 6 | 10 |
| PHSB 16 | POSB 16 | 7 | 14 |
