INA Axial cylindrical roller and cage assemblies

INA Axial cylindrical roller and cage assemblies, The cage assemblies comprise axial cages and one or two rows of cylindrical rollers. The diameter series 1, 2, 3, 4 correspond to DIN 616/ISO 104.

The cages are made from plastic or brass and are guided as standard on the shaft.

The cage assemblies have very low axial section height and high load carrying capacity. They can support axial forces in one direction. Radial forces must be supported by separate means.

Axial cage assemblies are combined with shaft or housing locating washers or are integrated directly in the adjacent construction. If they are used without axial bearing washers, the raceway must be produced as a rolling bearing raceway.

INA thrust cylindrical roller bearings

Related numbers

INA K89309-TV bearings
45mm x 85mm x 7.5mm
INA K89306-TV bearings
30mm x 60mm x 5.5mm
INA K89307-TV bearings
35mm x 68mm x 6mm
INA K89308-TV bearings
40mm x 78mm x 7mm
INA K89310-TV bearings
50mm x 95mm x 8mm
INA K89311-TV bearings
55mm x 105mm x 9mm
INA K89312-TV bearings
60mm x 110mm x 9mm
INA K89313-TV bearings
65mm x 115mm x 9mm

Related products