Nodes supplies spherical plain bearings, rod ends, bushings, thrust washers and trips. The brand include SKF, NSK, INA, TIMKEN, IKO.
SKF wrapped bronze bushings are particularly well suited for applications where high levels of contamination make relubrication necessary. The sliding surface of these bushings contains diamond shaped pockets that serve as reservoirs to progressively
SKF PTFE polyamide bushings provide maintenance-free, dry sliding operation and are designed for applications where other polymer bushings might fail prematurely.
SKF POM composite bushings are referred to as prelubricated because their material is designed to operate with marginal lubrication.
SKF PTFE composite bushings are the maintenance-free solution for heavy load/medium speed applications. SKF offers a wide range of both straight and flanged PTFE composite bushings. Advantages of these bushings include: maintenance-free operation ver
SKF solid bronze bushings are suitable for a wide range of operating conditions and applications. The solid bronze material is particularly well suited for highly demanding applications in tough environments. SKF offers a standard assortment of both
INA rod ends requiring maintenance and hydraulic rod ends incorporate spherical plain bearings with a steel/steel sliding contact surface. Schaeffler can also supply spherical plain bearings with a steel/ bronze sliding contact surface. INA rod ends
IKO PILLOBALLs are compact self-aligning spherical bushings that can support a large radial load and a bi-directional axial load at the same time. IKO rod ends bearing are classified by sliding surface types, namely, insert type, die-cast type and ma
INA maintenance-free rod ends and maintenance-free corrosionresistant rod ends comprise a housing with integral shank and a maintenance-free spherical plain bearing. The shank has an internal or external thread, the spherical plain bearing is firmly
INA Spherical plain bearings allow spatial adjustment movements and, depending on the bearing type, can support radial, combined or axial loads. INA radial spherical plain bearings INA radial spherical plain bearings requiring maintenance comprise in
SKF thrust spherical plain bearings have a convex spherical surface on the shaft washer and a corresponding concave spherical surface in the housing washer. They are intended to accommodate primarily axial loads but can also accommodate combined (rad
SKF manufactures maintenance-free rod ends with three different sliding contact surface combinations in different series: Steel/PTFE sintered bronze: SI(L) .. C, SA(L) .. C series Steel/PTFE fabric: SI(L) .. TXE-2LS, SI(L)A .. TXE-2LS, SA(L) .. TXE-2
SKF manufactures rod ends requiring maintenance with a steel/steel or a steel/bronze sliding contact surface combination. Steel/steel rod ends consist of a rod end housing and a steel/steel radial spherical plain bearing from the standard assortment,
SKF manufactures maintenance-free radial spherical plain bearings in a variety of designs and a wide range of sizes. Three sliding contact surface combinations are available: steel/PTFE sintered bronze, designation suffix C steel/PTFE fabric, designa
the sliding contact surfaces of angular contact spherical plain bearings are spherical in shape and inclined at an angle to the bearing axis. Consequently, these bearings are well suited for accommodating combined (radial and axial) loads. Single ang
IKO Spherical Bushings are self-aligning spherical plain bushings that have inner and outer rings with spherical sliding surfaces, and can take a large radial load and a bi-directional axial load at the same time. There are many types of Spherical Bu