SKF bushings selection

SKF bushings selection provide general technical information as well as comparisons of different materials and designs. Regarding SKF rolling bearing, please refer to SKF bearing selection . The performance of SKF plain bearings, which also includes...

Date: 2018-10-30

SKF rod end inner ring tolerances

SKF rod end inner ring dimensional tolerances are in accordance with ISO 12240-4:1998. The tolerances for the steel/steel rod end inner rings are listed as below: Inner ring dimensional tolerances for steel/steel, SKF Explorer steel/steel and steel/b...

Date: 2018-10-29

SKF bushing arrangements

The factors that are most important to consider when selecting the material and surface finish of the counter surface on which the SKF bushing slides are the load conditions such as load, angle of oscillation, type of movement, and environmental infl...

Date: 2018-10-25

SKF maintenance-free spherical plain bearings tolerances

The dimensional tolerances for metric maintenance- free radial spherical plain bearings are in accordance with ISO 12240-1:1998 and listed as below: Dimensional tolerances for metric maintenance-free radial spherical plain bearings Nominal diameter I...

Date: 2018-10-25

Internal and operating clearance of INA plain bearings

Operating clearance of INA spherical plain bearings The operating clearance or preload is determined on a fitted bearing still warm from operation. It is derived from the radial internal clearance and the change in the radial internal clearance as a...

Date: 2018-10-22

SKF bushing bearings designation

The designation for SKF bushing bearings identifies SKF bushings type, size, and material. Other designation about SKF rolling bearings refer to SKF bearing nomenclature . SKF solid bronze bushings Examples: PBM 354550 M1G1 (straight design) P Plain...

Date: 2018-10-19

INA plain bearing selection by material suitability

The various INA plain bearing types are available in different material combinations, see table. The suitable material will depend on the required performance capability and the environmental influences. Based on the specific material combinations, b...

Date: 2018-10-10

INA plain bearings selection

INA Plain bearings from Schaeffler are used under high specific loads and various possible types of motion, from swivel type motion to overlaid motion. They are ideally suited to intermittent operation occurring on a periodic or non-periodic basis. T...

Date: 2018-09-26

Areas of application of plain bearing

Plain bearings are used under high specific loads and various possible types of motion, from swivel type motion to overlaid motion. They are ideally suited to intermittent operation occurring on a periodic or non-periodic basis. The plain bearings ar...

Date: 2018-09-20

IKO rod ends precautions for use

Operating Temperature Range The maximum allowable temperature for Lubrication type IKO PILLOBALLs is +180 C for the insert type and +80 C for the die-cast type. The maximum allowable temperature for Maintenancefree type PILLOBALL Rod Ends is +150 C....

Date: 2018-07-30

IKO PILLOBALLs rod ends accuracy and fits

The accuracy of IKO PILLOBALLs rod ends is shown in Tables as bellow. The maximum radial internal clearance of the insert type is 0.035 mm. Tolerance Type Dimension Dimension symbol Tolerance PB Bore dia. of inner ring d H7 Outside dia. of outer ring...

Date: 2018-07-30

INA rod ends bearing suffixes

INA maintenance-free rod ends Suffixes for available designs: see table. Suffix Description Design 2RS Standard lip seals on both sides Standard 2TS Triple lip high performance seals on both sides - With special thread Special design, available by ag...

Date: 2018-07-30

INA Spherical plain bearings suffixes and cross reference

INA spherical plain bearings suffix INA maintenance-free spherical plain bearings suffixes for available design seel table. (please refer to INA bearing suffix for more information.) Suffix Description Design 2RS Standard lip seals on both sides Stan...

Date: 2018-07-27

sliding layers of INA Spherical plain bearings

INA maintenance-free spherical plain bearings have special sliding layers based on polytetrafluorethylene PTFE in the outer ring. In descending order of performance capability, these are: ELGOGLIDE, the highest performance sliding layer ELGOGLIDE-W11...

Date: 2018-07-26

SKF radial spherical plain bearings internal clearance

SKF radial spherical plain bearings are produced with Normal radial internal clearance as standard. Prior to ordering, check availability of bearings with a smaller (C2) or larger (C3) radial internal clearance than Normal. Radial internal clearance...

Date: 2018-07-24

SKF radial spherical plain bearings clearance

SKF maintenance-free radial spherical plain bearings internal clearance, preload Steel/PTFE sintered bronze sliding contact surface: Radial internal clearance and frictional moment of steel/PTFE sintered bronze bearings Nominal diameter Radial intern...

Date: 2018-07-24

SKF maintenance-free rod ends tolerance

SKF rod end inner ring dimensional tolerances are in accordance with ISO 12240-1:1998. The tolerances are listed as below: Inner ring dimensional tolerances for maintenance-free rod ends Bore diameter SA(A) and SI(A) series SAKB and SIKB series d dmp...

Date: 2018-07-24